the common troubles include:
crack inside the transducer housing: the housing can crack at any region. this problem comes about while you drop or hit the transducer.
dried out lens: the transducer lenses are designed to be wet but it is commonplace for them to dry out while you operate the incorrect disinfection. whilst your lenses have dried out it way that you have washed them with fluids containing alcohol. to restoration the problem you must practice the proper gel.
hollow in the lens: you’ll have a hollow inside the lens whilst the lens has been hit with another item or has dropped at the ground. a telltale signal that your lens has a hollow is a hollow on your snap shots. it is good to be aware that a hole in the lens can also be added about by means of put on and tear of the wires. it is also commonplace to have the identical effects whilst the wires were reduce with a sharp object. before you run into conclusions you must first look at the cables and lenses.
VIDEO LINK: http://dailyqom.com/2017/01/11/rescuers-spent-almost-4-days-chasing-helpless-creature-watch-happened/
strains inside the image: snap shots on account of the transducer cable could have lines when the cable has been run over by means of a cart machine hence causing wear and tear. it is also commonplace to have the same problem when the cable has been hit or uncovered to strain for a long time.
taking care of the probes
to avoid the issues that come with the probes you have to take accurate care of them. one of the things that you ought to do is to frequently look at the probes. you need to pay attention to the lens. for best results check out the lens with a magnifying glass. all probes come with their pointers for use and cleansing. for ideal results, you ought to comply with these hints.